How To Change Cabinet Doors: A Comprehensive DIY Guide For Kitchen And Bathroom Transformation

Regular use can diminish the visual appeal of a cabinet door. Also, due to constant wear and tear, you may find that your kitchen or bathroom cabinet doors have worn out and do not provide the same functionality as they used to.

Luckily, the solution to this is simple and not that expensive. If you find signs of damage, do not decide to change the entire cabinet but simply swap the cabinet doors. This way, you can give a facelift to their visual appeal and also revive functionality.

When Should You Change Your Cabinet Doors?

• Misaligned or uneven look.
• Visible signs of damage on the wood.
• Faded or depreciated visual appeal.
• Unpleasant cracking sound.
• Broken hinges.

How To Change Cabinet Doors?

Write Down Important Points

Before beginning with anything, one must take a pen and paper and note down all the important points. Now, this includes your budget limits, material requirements, the current condition of your cabinets, and when can you install the new ones. 

By writing down everything, there are minimum chances of any mistakes, and navigating a solution becomes easier.

Take Measurements

Use a measuring tape to get the dimensions of your current doors. This is crucial because the figures that you note down will decide whether the new one will fit in well with the cabinet or not. Some people prefer measuring the cabinet from the backside because the surface is flat. But there are many areas that you need to cover. 

Carefully measure the following things -

• Cabinet Height
• Cabinet Width
• Hinge Placements
• Door Swing Direction

Remove Old Cabinet Doors

Now that you have noted down the measurements, you are free to remove the old doors. For that, you will require a screwdriver or possibly a drill if you know the correct way of using it. 

Carefully discard the screws and bring down the cabinet doors. One important thing here to note is that if you are changing cabinet doors because you’re bored with them, then that means they are still functional and can be used somewhere else. In that case, keep them in a safe place so that whenever a requirement comes up, you have them in perfect condition. 

On the other hand, if you’re replacing them because they were damaged and worn out, then do whatever you want with them. Just do not leave them in a place where someone gets harmed.

(Tip - If you do not know how to remove and install cabinet doors, you can contact our Kitchen Designer Dubai team to get that done for you. We provide budget-friendly services and work exceptionally well.)

Choose New Cabinet Doors

This is the exciting part. You have an ample number of options to choose from like solid wood, melamine, plywood, fiberboard, etc. Obviously, it is your decision but there are some important things that you must keep in mind -

• We all know kitchen and bathroom cabinet doors are used pretty enormously. So, to withstand that, choose a material that is durable.
• Keep in mind that the kitchen faces high temperatures whereas the bathroom faces low temperatures. It is important to consider this because different materials react differently to temperatures and therefore you must choose according to that.
• Accept your budget constraints and make a wise decision. Do not fall into someone’s trap and choose an over-expensive material. Exceeding your budget is only going to give you trouble later on.
• There is a lot of variety when it comes to cabinet doors. So, choosing the one that suits your home interiors can really amp up the visual appeal of your place.

Install New Doors

This is the most important task of all. To make things happen perfectly, you require the right tools and some skills in order to install the new cabinet doors you ordered.

If you have to paint the cabinet doors, make sure you do that properly using the right technique and paint material. Also, before painting, always cover the surface because extra paint can fall off and create marks.

Next comes installing the hinges. So, it can be said that this is the only typical task left because the steps after this are quite the easiest of all.

You need to make sure that the hinges align correctly with the cabinet frame. Some people prefer switching to soft-close hinges because they look elegant and nice. Next, check if the cabinet movement is smooth and stable and does not produce any noise. If you have installed everything perfectly, then there would obviously be no issue whatsoever.

Install Hardware

The task of installing hardware components is not that tough. You will find all the instructions in the user manual that comes with them. Read it all carefully to assemble the components and install them onto the cabinet in the perfect way. 

We prefer using simple hardware components for your kitchen or bathroom cabinet doors because they are easy to assemble and install and also do not occupy too much area.

(Tip - If you have trouble installing the hardware or the new cabinet doors, reach out to our Carpenter Dubai team. We can provide you with the best services at an affordable price.)

Finishing And Inspection

Once everything is done, inspect it all to make sure that there are no issues with the cabinet doors. Keep a checklist of the given things -

• Make sure that the doors are not making any unnecessary sound.
• See that they are opening and closing easily.
• Check that all the screws are tightened perfectly.
• Observe over time to find errors after day-to-day usage. Sometimes, you may find loose screws or any other issues after some days of using the cabinet doors.

Bottom Line

Changing the cabinet doors of your kitchen or bathroom can easily upgrade the look. In simple words, it is the cheapest way to elevate the visual appeal of your place and make things fresh again. 

Just keep the above-mentioned things in mind and make informed decisions. The task is not tough, but it is also not as easy as it sounds!